Paint Test Equipment Hydraulic Pull Off Adhesion Tester
Paint Test Equipment Hydraulic Pull Off Adhesion Tester

X1004. Adhesion Tester (Right angle) 0-3500 PSI (0-25MPa)
The Adhesion Tester is compliant to ISO 4624 and ISO 16276-1.
Gauge accuracy 1%FSD.
The HATE Adhesion Tester or Pull Off Adhesion Tester is an instrument that measures with ease and precision the adhesion bond strength of applied coatings. This is one of the most accurate and versatile adhesion testers currently available. The adhesion is measured by the tensile pull on a Dolly glued to the coating surface. The force is applied through the center of the Dolly by a hydraulically loaded pin. This ensures an exactly central point loading of the force. Adhesion values are recorded by a pressure gauge giving a 1:1 pressure reading. This is made possible as the net surface area of the Dolly is equal to the surface area of the hydraulic piston bore. Pressure reacted by the Dolly is the same as the pressure in the bore and is transmitted directly to the pressure gauge. The maximum value achieved at pull-off is recorded by a reset needle that is easily read on the large scale of the pressure gauge.

Please click on the links below for additional information on the models available for this product:

Powered by Marctin Web Architecture