Paint Test Equipment Cross Hatch Cutter
Paint Test Equipment Cross Hatch Cutter

International Standards: ISO 2409, ISO 16276-2 and ASTM D3559

Paint Test Equipment Cross Hatch Cutter Kit - includes foam-filled carrying case, 3x illuminated magnifier and adhesion test tape (50mm)
Allows an assessment to be made of the adhesion resistance of coatings to separation from substrate.
The Cross Hatch Cutter is a precision instrument that allows an assessment to be made of the adhesion resistance of coatings to separation from substrates when a right-angled lattice pattern is cut into the coating and penetrates through to the substrate. The coating thickness determines the Cutter size used. The 1mm Cutter (CHC-1) is suitable for coatings under 60 Microns. The 2mm Cutter (CHC-2) is suitable for coatings over 60 Microns. Simple operation, each Cross Hatch Cutter has 6 cutting blades spaced either 1mm or 2mm apart. Make one cutting pass through to the substrate. This makes 6 cuts in the coating. A second pass at 90 makes a square lattice pattern. Apply Adhesive Tape over the cut lattice section and within 5 minutes remove tape. Classify the cut area with the Viewing Lens according to the relevant national standard classification guide.

Please click on the links below for additional information on the models available for this product:
 

Powered by Marctin Web Architecture